photoelectric diffusive sensor ODD50
Photoelectric diffusive sensor box.50 – ODD50
martie 12, 2019
photoelectric diffusve sensor ODD53
Photoelectric diffusive sensors ODD53
martie 12, 2019

Photoelectric diffusive sensor box.51 – ODD51

Optical diffuser in rectangular box type 50. Possibility to connect with a cable or a plug.

Categories: ,

Technical parameters and connection schemes

– Protection against back-up of the power supply.
– Overvoltage protection at inductive load.
– Short circuit protection at the output – for ODD53xx
-Regulating sensitivity.
-Light indication of working conditions.
-Communication element transistor.
-Availability of two outputs: „light” and „dark” switching.


BDS EN 60947-5-2

– Supply voltage: 12 … 24 V (10 … 30 V) DC
-Main switching current: 200 mA DC
-Maximum power consumption: 25 mA
-Top max switching frequency: 100Hz
-Admissible light from smothering
light sources in the reception area: 5000Lx
– Insulation resistance:> 10MΩ / 500V
-Operating temperature: -10 … + 55ºC
– Moisture: RH 85%, without dropping
– REFUGEE: on request – 2m cable 4 x 0.14 mm2
– M12 plug, M8 connector for ODD53xxCL
Storage temperature: -25 .. + 55 ºC, RH 85%
Degree of protection: IP 65
-Steel resistance: 10 … 55 Hz amplitude 0.35 mm
-Ight resistance: 49m / s2 (5g)
-Housing material ODDxxX311x: cylindrical-metallic – brass, chromed
ODD18X312x, ODD52X312x, ODD53: plastic – ERTALYTE or PVC
ODD50X311x, ODD51X311x: Aluminum
-Material of the optical part: glass
– Cable insulation: PUR polyurethane
Nominal action distance: in meters (standard: 100x100mm white cardboard)

Оптичен датчик дифузен тип


Оптичен датчик дифузен тип
Оптичен датчик дифузен тип


The sensors are unrecoverable and are designed for operation in normal climatic conditions, in normal fire environment, with no fluids and gases aggressive to the material of the body and the cable. Mounting to exclude effort on the housing or cable. The sensors should be fastened using the nuts supplied.
Attention! Do not use organic solvents to clean the optical part!
In the sensor head area, the allowable torque for tightening the nuts is reduced by half! Allowable torque for metal housings M18x1 – 40Nm, M30x1.5 – 40Nm.
Permissible tightening torque for plastic housings – 1.5Nm.