Logical block STS609
Logical block STS 609
martie 12, 2019
hydrostatic sensor for level PD102
Hydrostatic level sensor with current output PD102
martie 12, 2019

Hydrostatic level sensor with current output PTD102

The sensor is designed to measure the fluid level by reading the hydrostatic pressure. The connection is two-wire and the sensor is powered by the line. Back-up protection is provided. The installation is to be carried out according to the attached drawing – the sensor is above the maximum level of the fluid airborne insulation. The pressure equalizing hoses removed at the connection terminals should be left open. Do not try to dislodge the sensor. This will lead to its overheating and damage!

Technical parameters and connection schemes

The sensor is designed to measure the fluid level by reading the hydrostatic pressure. The connection is two-wire and the sensor is powered by the line. Back-up protection is provided. The installation is to be carried out according to the attached drawing – the sensor is above the maximum level of the fluid airborne insulation. The pressure equalizing hoses removed at the connection terminals should be left open. Do not try to dislodge the sensor. This will lead to its overheating and damage!

TECHNICAL PARAMETERS:

Supply voltage: 24Vdc / 18-30Vdc /.
Wet pressure: 0-100 mbar.
Maximum permissible overload: 750 mbar.
Fluid isolation: air.
Initial setting time: <1 sec.
Output: 4 – 20mA.
Linearity: <1%.
Output load resistance: <500 Ohm.
Electrical connection: cable 2×0,34 + screen.
Mechanical connection: G1 / 4 ”
(as per the appended reading).
Dimensions: as per app.
Housing material: chromium-nickel / polyethylene.
Operating temperature: 0 .. + 60 ° C.
Degree of protection: IP65.

DIMENSIONS:

и

Двупроводен хидростатичен датчик за ниво

CONNECTION SCHEME

Двупроводен хидростатичен датчик за ниво

RECOMMENDED INSTALLATION

Двупроводен хидростатичен датчик за ниво