Lighting controller STS-107-500
March 12, 2019
Two-channel counter STS805
Two channel counter STS – 805
March 12, 2019

Programmable controller STS 525 M01

STS 525 M01 is a 24-hour real-time clock with 8 programmable outputs. For each output, up to 20 entries can be entered with the on / off time and the off time, with the minimum step being 1 second. The device menu allows you to set, view and edit / delete and add / record, test outputs, and set the clock. The settings are retained even when the supply voltage drops. In set and view / edit modes, exits are active.

Technical parameters and connection scheme

Programmable real time clock controller with 8 STS 525 M01 outputs

TECHNICAL PARAMETERS:

Indication: LED
– digital – two lines of 6 digits;
– ‘OUT’ – ‘OUT 8’ – output state – 8 LEDs – red;
Power supply:
– Supply voltage – 90 – 230 V ac
– power consumption – <5VA
Outputs:
– relay – normally open contact – 3A – 250V ac, 3A – 30V dc;
Number of records for each output – 20;
Minimum recording step – 1 second;
Mechanical connection: for face mounting in a 90x90mm square hole, using plastic brackets (included)
Electrical connection: screw terminals – dismountable
Dimensions: 96x96x100mm
Material: plastic
Operating temperature range: 0 … + 50 ° C
Operating humidity: 0 … 80% RH
Degree of protection:
– on the panel – IP 40;
– housing – IP 20;
– the terminals – IP 20.
Storage conditions:
– temperature – -10 … + 60 ° C
– humidity – 0 … 95% RH
Enter / add / new record

In the entry / add new entry mode, enter the menu by pressing the NEW button for 3 seconds. Lighting LED NEW. The number of the output for which the entry will be entered flashes on the display. The number of the desired output is selected by pressing the UP / DOWN buttons.

Basic / working mode

Програмируем контролер часовник реално време с 8 изхода STS 525 M01

Програмируем контролер часовник реално време с 8 изхода STS 525 M01

The current time is displayed on the display. The number available for correction flashes. The value is changed by pressing UP / DOWN. Move to the next digit to correct by pressing the SHIFT button. The process is cyclical.

Note:
When you exit the menu, the entries are automatically sorted in a sequence determined by the switch-on time.
In this mode, it is not possible to delete or correct an existing record.
If you stay in the menu for more than 60 seconds without pressing a button, the device automatically switches to basic / operating mode without recording the current / unsaved / changes.

View, edit, delete records

In the viewing, editing and deleting mode, enter by pressing the EDIT button for 3 seconds. LEDs EDIT light. The display number blinks on the output to be viewed / edited. The number of the desired output is selected with the UP / DOWN keys

Basic / working mode

Програмируем контролер часовник реално време с 8 изхода STS 525 M01

Програмируем контролер часовник реално време с 8 изхода STS 525 M01

Програмируем контролер часовник реално време с 8 изхода STS 525 M01

From this state, pressing the ENTER button switches to test mode for all outputs together. Their status is switched by pressing the SHIFT button.
The next time you press the ENTER button, the device returns to the main / operating mode. Note:
In this mode, the outputs are only manually controlled. If you stay in the menu for 60 seconds without pressing a button, the unit automatically switches to main / operating mode.
Set time and date

Enter the mode by pressing and holding for 3 seconds the TIME button. Blink LEDs NEW and EDIT. The current time is displayed on the display. The number available for correction flashes. The value is changed by pressing UP / DOWN. Move to the next digit to correct by pressing the SHIFT button. Process complete.

Basic / working mode

Програмируем контролер часовник реално време с 8 изхода STS 525 M01
Pressing the CLEAR button cancels the corrections made and returns to the first digit.
Confirmation of the set time and transition to date setting is done by pressing the ENTER button.
The display shows the current time. The number available for correction flashes. The value is changed by pressing UP / DOWN. Move to the next digit to correct by pressing the SHIFT button. The process is over.
Pressing the CLEAR button cancels the corrections made and returns the first digit.
Програмируем контролер часовник реално време с 8 изхода STS 525 M01

Confirm the changes and exit to the main / working mode by pressing the ENTER button. Therefore, the changes made are recorded.

Note:
In this mode, exits are not active. Upon exiting the device, the device continues to run the program with the newly set time.
If you stay in the menu for more than 60 seconds without pressing a button, the device automatically switches to basic / operating mode without recording the changes.

DIMENSIONS:

Програмируем контролер часовник реално време с 8 изхода STS 525 M01

Allowable minimum distances between adjacent devices.

Програмируем контролер часовник реално време с 8 изхода STS 525 M01

CONNECTION SCHEME:

Програмируем контролер часовник реално време с 8 изхода STS 525 M01

TABLE WITH USED SYMBOLS

Програмируем контролер часовник реално време с 8 изхода STS 525 M01
Electronic devices are designed to operate in normal climatic conditions, in normal fire safety environments, with no fluids and gases aggressive to the material of the enclosure.