Magnetic sensor for long distance MFD20
Μάρτιος 8, 2019
Magnetic cyclometric sensors М12-М22 – MD12,18,22
Μάρτιος 8, 2019

Magnetic sensor with built in magnet MD85U

Technical parameters and connection schemes

TECHNICAL PARAMETERS:
– switching distance> 8mm;
– switch off distance <25mm
(for a ferromagnetic object with an area larger than the working area).
Supply voltage: 10 – 30 V dc.
Switching element: transistor.
Maximum Switched Current: 0.05A.
Maximum switching frequency: 10Hz.
Residual output voltage: <2.5 V at 25 mA.
Own consumption: <0.15 mA.
Line resistance for cable integrity control: 0 ohm *.
Maximum allowable control line voltage: 100V.
Connection / electrical /: 4×0,25 mm2 cable – 1,5m.
Installation: 2 holes F6 – Fig.
Attention! The sensor is not for embedding. For correct operation it is necessary to install it at a distance of more than 20mm from ferromagnetic objects!

Dimensions: 45x55x15 – Fig.
Housing material: Aluminum.
Working temperature range: -20 … +70 ° C.
Humidity: 50% RH at 70 ° C. 100% RH at 54 ° C.
Degree of protection: IP67.
Storage conditions:
– temperature – -20 … +80 ° C.
– Humidity – 50% RH.

* at customer request.

.

DIMENSIONS

WORKING ZONE

Магнитен датчик с вграден магнит MD85U

CONNECTION SCHEME

Магнитен датчик с вграден магнит MD85U