photoelectric sensor for labels ODS551CL
Photoelectric label sensor ODS551
Μάρτιος 12, 2019
electronic timers STS103
Electronic timer STS103
Μάρτιος 12, 2019

Electronic timer STS102-04

Electronic time relay is a microprocessor device that allows one or two time intervals, non-volatile memory and relay output. Programming is done by the front panel keypad. External control is possible.

Technical parameters and connection scheme

Electronic time relay is a microprocessor device that allows one or two time intervals, non-volatile memory and relay output. Programming is done by the front panel keypad. External control is possible.

TECHNICAL PARAMETERS:

– Power on delay
– delay during shutdown
– one-time impulse
– generator mode
– Summing up the two delay periods to 20 hours

Time Delay Range:

from 0.2 seconds to 9 hours 59 minutes 59.9 seconds
Error: <0.025%

Entrance:
Automatic triggering after power supply
NPN transistor or NO mechanical contact between 6 and 7 terminals

Output:
Relay – 5A / 2 x (NO + NC)

Indication:
4 – Digit digital indication
Hours – Minutes – Seconds
Relay – red LED

Power supply:
24 VAC / DC (+/- 20%) / 0.1 A

Dimensions: 36 x 36 x 97 mm
Connection: 11 position circular coupling
Operating temperature range: 0 ° – 50 ° C
Degree of protection: IP 40 for the panel
IP 20 for the plug

Programming

After the supply voltage is switched on and the display is illuminated, press the MODE button once. In the leftmost segment, the letter A – setting the first date range appears. The initial state of the relay: «On» or «OFF» is selected with the RESET button. Pressing the SELECT button switches the time setting to the range
are seconds and tens (SS.D) and hours and minutes (H.MM), and is indicated by the corresponding LEDs. The blinking digit is set by the RESET button. Next pressing the SELECT button allows you to choose to end the «End» period or continue with the other «CO» -continue period. Pressing the MODE button again includes the second programming mode
(letter «B») as described above.

Електронно реле за време STS - 102

The third press of the MODE button switches to the «ReaDY» standby mode. The timer starts with the RESET button when the supply voltage is switched on or by shortly connecting the 6 and 7 terminals of the plug.

Електронно реле за време STS - 102

DIMENSIONS

Електронно реле за време STS - 102

Electronic devices are designed to operate in normal climatic conditions, in normal fire safety environments, without fluids and gases aggressive to the material of the enclosure.

ADDITIONAL DATA:

Supply voltage: 24 V AC / DC 50/60 Hz
Switching capability: 5A / 250Vdc or 1250 VAC, cosφ = 1
Mechanical resistance: 20×100³ cycles
Electrical resistance: 1 x 100³ cycles
Insulation resistance:> 10MΩ at 1000V
Operating temperature; 0 … + 55 ° C
Humidity: (RH) 85%, without dropping
Storage temperature: -25 .. + 55 ° C, RH 85%
Degree of protection of the panel: IP40
Vibration resistance: 10 … 55 Hz amplitude 0.35mm
Housing material: polyvinyl chloride, PVC